Preparation,Characterization and Controlled Release Investigation of Biocompatible pH-Sensitive PVA/PAA Hydrogels

In the present research hydrogel films based on polyvinyl alcohol (PVA) and polyacrylic acid (PAA) blend, with various crosslink densities, have been prepared through different thermal treatment. The results of FTIR and DSC confirmed quality and quantity of conclusion on miscibility of PVA/PAA blends, respectively. Besides, biocompatibility of the samples has been proved in cytotoxicity tests using L929 cells, according to ISO10993–5. Water uptake of the hydrogel blends is measured. pH sensitivity properties of blends are studied with and without boiling in NaOH solutions where the effect of swelling in water before boiling has also been investigated. Preswellings in water and NaOH concentration have been found to be mainly effective on pH sensitivity of PVA/PAA blends. Biocompatibility and pH sensitivity behavior make these hydrogels appropriate candidates to orally deliver drugs such as insulin and peptides that can be released in basic pH of intestine. The stability of these films in acidic solutions and its expansion and also the consequent release of drugs in basic solutions have been studied by using Teofilin as a model drug by UV-spectrophotometeric measurements.     

Degradation pathways of dissolved carbon in landfill leachate traced with compound-specific 13C analysis of DOC

The isotopic compositions of carbon compounds in landfill leachate provide insights into the biodegradation pathways that dominate the different stages of waste decomposition. In this study, the carbon geochemistry of different carbon pools, environmental stable isotopes and compound-specific isotope analysis (CSIA) of leachate dissolved organic carbon (DOC) fractions and gases show distinctions in leachate biogeochemistry and methane production between the young area of active waste emplacement and the old area of historical emplacement at the Trail Road Landfill (TRL).

The active area leachate has low DOC concentrations (<200 mg l^?1) dominated by fulvic acid (FA=160 mg l^?1), and produces CH₄ dominantly by CO₂ reduction (D? excess=20.6‰). Leachate generated in the area of older waste has high DOC (>4770 mg l^?1) dominated by FA (4482 mg l^?1) and simple fatty acids (acetic=1008 mg l^?1 and propionic=608 mg l^?1), and produces CH₄ by the acetate fermentation pathway (D? excess=9.8‰). CSIA shows an advanced degradation and a progressive accumulation of ¹³C of fatty acids in leachate from the older area. The enriched ¹³C value of FA (?20 and?26‰ for the older and active parts, respectively,) and of low molecular weight DOC (?8 and?27‰) as well as of the bulk DOC (?21 and?25‰) shows more advanced degradation in the older part of the landfill, which is consistent with the shift in the humic/FA ratios (0.05 and 0.18). The ¹³C enrichment of acetate (?12‰) above the ¹³C of DOC (?21‰) and of propionic acid (?19‰), in older leachate, suggests that this acetate has not evolved from the simple degradation of larger organic molecules, but by homoacetogenesis from the enriched dissolved inorganic carbon (DIC) pool (8‰) and H_2, which produce a more enriched ¹³C of acetate. In contrast, the ¹³C of the minor acetate in the active area (?17‰) indicates that CO₂-reducing bacteria must be the primary consumers of H₂, which has resulted in enriched ¹³C_DIC (10‰) and depleted ¹³C_CH4 (?58‰).     

Application of an electrostatically actuated cantilevered carbon nanotube with an attached mass as a bio-mass sensor

In the present paper, another latent capability of SWCNT as a mass sensor is investigated. The relationship between the resonant frequency, dynamic pull-in voltage at the resonance frequency shift, and the attached mass is established by using the nonlocal Euler–Bernoulli beam theory. Using this relationship, a general closed-form nonlinear sensor-equation has been derived for the detection of the mass attached to the SWCNT. The aim of this study and present model is to show the sensitivity of the Cantilevered SWCNT to the values and positions of attached mass. Moreover, the results indicate that by increasing the value of attached mass and considering a single non-local scaling parameter (e₀), the values of dynamic pull-in voltage at the resonance frequency shift are decreased. Because of the small scaling parameter (e₀), the mass sensitivity of carbon nanotube increases, when the position of the attached mass is in the tip of a Cantilevered SWCNT length. The authority and the accuracy of these formulas are examined with other pull-in sensor equations in literatures. The results demonstrate that the new sensor equation can be applied for CNT-based mass sensors with rational accuracy.     

Naturally occurring antitubercular cyclic peptides

The antibiotic pipeline has failed to keep pace with the rise of multidrug resistant tuberculosis and extensively drug-resistant tuberculosis pathogens. Naturally occurring peptides provide a rich source of lead compounds for developing novel pharmaceuticals with high selectivity and potency. Given the vast number of naturally-occurring bioactive cyclic peptides identified so far, the following digest highlights several cyclic peptides, discovered in the preceding decade, that exhibit promising activity against Mycobacterium tuberculosis.     

Emission and performance analysis of DI diesel engines fueled by biodiesel blends via CFD simulation of spray combustion and different spray breakup models: a numerical study

Journal of Thermal Analysis and Calorimetry - In the current study, computational fluid dynamics code was used to perform 3D simulation of mixture formation and combustion of biodiesel fuel spray...     

A new formulation for fictitious mass of viscous dynamic relaxation method

Abstract

In this article, a new relationship is proposed for the fictitious mass of viscous dynamic relaxation (DR) method. First, incremental equations are derived for DR steps. Using transformed Gershgörin theory, a new relationship is achieved for fictitious mass of viscous DR by formulating modified time step ratio. This procedure presents a new algorithm for the viscous DR method. To evaluate the numerical efficiency of the proposed method, some 2D and 3D truss and frame structures are analyzed with elastic linear and geometrically nonlinear behaviors. Results show that by using the proposed algorithm for fictitious mass, the convergence rate of the viscous DR method is improved so that the proposed algorithm presents the structural response with lower iterations in comparison with other common DR techniques.

Communicated by Joerg Fehr.     

纳米尺度NiLa2O4尖晶石催化NaBH4还原亚胺制仲胺

由溶胶-凝胶法制得的Ni-La化合物经热分解制备了纳米尺度NiLa2O4尖晶石，在750 oC焙烧后形成了结晶良好的尖晶石结构.采用差热分析、X射线衍射、透射电镜、扫描电镜和粒度分布分析等手段表征了该尖晶石的物理化学性质.结果表明，该纳米颗粒有规则的外形和确定的晶面，由平均粒径为40 nm的规整半球晶粒组成.精修的晶胞参数a=3.861205?和c=12.6793?.在NaBH4选择还原亚胺制相应仲胺的反应中，该新型纳米NiLa2O4尖晶石可用作高效多相催化剂，得到了较高的产物产率.所有反应可在室温和相对较短的时间内完成.在优化的反应条件下，均可得到带有不同芳基的，包括带有吸电子和供电子基团的仲胺.该催化剂回收简便，重复使用4次，其催化活性未见明显下降.     

Copper iodide nanoparticles-decorated porous polysulfonamide gel: As effective catalyst for decarboxylative synthesis of N-Arylsulfonamides

A porous cross-linked poly (ethyleneamine)-polysulfonamide (PEA-PSA) as a novel organic support system is synthesized in the presence of silica template by nanocasting technique. The paper demonstrates immobilization of CuI nanoparticles inside the pores (PEA-PSA@CuI) for the facile recovery and recycling of these nanoparticles. The presence of porous PEA-PSA and PEA-PSA@CuI nanocomposites was confirmed using FT-IR spectroscopy, FE-SEM, EDX, TGA, XRD, TEM, BET, XPS, WDX, ¹H NMR, and ICP-OES techniques. The PEA-PSA@CuI along with Ag(I)/K₂S₂O₈ was implemented as a reusable cooperative catalyst-oxidant system in the N-arylation of p-toluenesulfonamide with substituted carboxylic acids in mild condition. So, the novel decarboxylative cross-coupling catalyzed by copper and silver has been developed. Aromatic, secondary and tertiary aliphatic acids underwent high efficient decarboxylative processes with p-toluenesulfonamide to afford the corresponding products. This method provides a practical approach for the flexible synthesis of sulfonamides from the readily affordable substrates. The catalyst is highly reusable and efficient, especially in terms of time and yield of the desired product.